The Ultimate Assembly - Hydrotech's open joint architectural paver assembly, with a single-source warranty..

Ideal for roof terraces, vegetated roofs and plazas, The Ultimate Assembly begins at the substrate with Hydrotech's premier waterproofing membrane, Monolithic Membrane 6125, and carries through to the overburden of the architectural pavers. Hydrotech's architectural pavers offer high compressive strength, low moisture absorption, and a wide variety of colors and textures.
Benefits

Unlike sand or mortar setting bed installations, the architectural pavers are installed in an open joint assembly, supported at the four corners on spacer tabs or pedestals. Pavers resting on pedestals or tabs can convert sloped decks to dead level usable roof areas. This method of installation provides many distinct advantages...

* Open Joint System - open joints facilitate the flow of water below the paver surface to concealed drains, while also eliminating ponding water and trapped moisture.

* Access to Substructure - drains and all assembly components are easily accessible. If the need should arise, pavers can simply be lifted and reset in place so maintenance and future alterations are easily accomplished.

* Installation Flexibility - pavers are set directly on spacer tabs or adjustable pedestals to an established grade and even leveled where a sloped deck exists, a simple, durable solution.

Note: Hydroflex 30 is a specially formulated heavy duty, rubberized asphalt, protection sheet with synthetic fiber reinforcement. Hydroflex 30 is specifically designed to be embedded into Hydrotech's Monolithic Membrane 6125 roofing and waterproofing membranes to provide protection from typical construction traffic. In high traffic areas where vehicular traffic is anticipated or extreme physical abuse is expected, additional protection may also be required for the membrane assembly.

For more information, please visit http://www.hydrotechusa.com/assemblies/roofing